Digital Chum - Virtual fish guts and other nonsense

Our cats are not spoiled

Our cats love to hang out on the window sills, especially when the windows are open. They bird-watch and chatter at squirrels or just sniff the air, looking all relaxed and happy. I often thought it would be nice if they could go outside in a controlled area just to get a better view and find more sun.

So… since I had some free time the past four months (*cough*), I decided that I would create just such an area for the cats… a cat veranda, if you will. It was an adventure.

The base I first made the base out of some scrap wood we had in the garage. I was going to make the enclosure frame out of wood too, but upon further consideration, 3/4″ PVC pipe seemed like it would be easier… and easier means faster means I’ll actually finish the project. That was easily decided.

Planning a moderately elaborate “box” made out of PVC is not as easy as one might initially believe. Most hardware stores don’t carry three-point “corner” pieces in the plumbing department. They exist, but they’re not common, so I had to plan odd corners and convoluted joints using right angle elbows and Ts… both of which add about 3/4″ to the length of the pipe… and I was using sometimes six pieces in a single run.

The decidedly sketchy plans My plans were sketchy at best, but I muddled through the measurements with a cup of coffee, a pencil, and a now overused eraser. I’ve decided that PVC math is hard and I don’t want to do it anymore. It turned out that I had everything right except for one end, which had corner posts about two inches short… an easy fix.

So I figured out what I needed (more or less) and headed to Lowe’s (like Home Depot, but blue), plans in my pocket, to make the purchase. Easy in. Easy out. As an added bonus, I was able to fit the five 10-foot sticks of PVC in my Mercury Montego with all the doors and windows closed.

Are you kidding me?! Three feet short?! So now I had all my stuff and it was time to start chopping up the PVC into the needed lengths. I broke out the chop saw and went to work (measure twice, cut once). Everything was going great until I neared the very end and (insert many colorful expletives here) I realized that I need three more feet of PVC. Three feet! I ran around the house looking for some extra lying around, but of course all I could find was 1/2″ and 1″… no 3/4″. I was going to make a mental note about something related to it, but the thought got drowned out in the continued profanity.

This time I went to Home Depot (it’s 1/4 mile closer) and grabbed another 10-foot stick of 3/4″ PVC.

It's like Lincoln logs!... without the fun! Okay… all set. Good to go. Time to start putting this puppy together. My plans were weighted down so they wouldn’t blow away because if I lost them, this project would have been over. I wasn’t going to do that &$%!*# PVC math again. I had about 53′ of cut PVC, 30 Ts, and 10 elbows. I had cleaner and glue, too, but I wasn’t sure if I needed it (or wanted it… it’s a bit unforgiving).

The assembled PVC frame! Things went pretty well during the assembly. I made a few changes on the fly (and they actually worked out). It all stayed together fairly well without the glue. A wooden mallet helped with that.

So the frame was complete, but it certainly wouldn’t keep a cat contained… not even a lazy one. So it was time to add the wire. I got 1″x1″ fencing wire, cut it to fit each section, and zip tied it into place. A few cuts and scrapes later and it actually looked like an enclosure.

Point of note… I used to make rabbit hutches and sell them when I was in high school, so I’ve worked with cage wire a lot (not chicken wire, but the good stuff). If anyone offers you the opportunity to work with 1″x1″ wire or 1″x2″ wire or pretty much anything similar… don’t.

All wired up and nowhere to go. So I had my cage. I had my base. Now I had to assemble the whole kit and kaboodle into a working unit that could be inhabited by cats. Sadly, I hadn’t really thought it through this far… at least not definitively. It had to rest against a dual kitchen window… and somehow not fall over, collapse, rip down the siding, destroy the screens, or demolish the window frame. Plus it had to somehow link to the inside of the house… you know, so the cats could actually go into it?

Whose crazy idea was this?!

Mounting the base (yeah, I said it!) Okay… so I figured it wasn’t going to hang off the window all by itself, so I made slots to hold legs, put four legs under it, added a lip to sit on the edge of the window frame, and used the interior window panel (that I made but didn’t photograph) to hold it all into place… sort of like a window air conditioning unit. I stand by that design, but I’ll withhold final judgment until after the next windstorm.

All that was left was to attach the enclosure and toss in some cats. Easier said than done (on both counts).

Ready for cats! I attached the enclosure using more trusty zip ties and some eye hooks. I didn’t photograph that in detail because, frankly, it’s embarrassing. However, it did work and I’m assuming it’s all still in place, though I can’t see it while sitting in front of my computer.

Next came the cat test! Lori shoved Houdini through the door, which was pretty easy because he didn’t fight it. He took to it right away, checking it all out and hopping up on the platform.

Peanut wasn’t too happy about getting shoved through the door, but she checked it out and decided that, at least for now (without the sun beating down on her), the couch was a more desirable choice.

Sophie loved it and hung out there for a good half hour until she realized that we’d eaten dinner and she hadn’t gotten any.

Chexie didn’t get to try it because Peanut hates her. I’ll have to make a special one for her.

Here they are checking it out.

Houdini Peanut Sophie viewed from inside the house

So… all done. The cats had better appreciate it or we’re getting rid of them and getting new cats that do.

I’m going to go bandage up my hands now.

15 Comments

  1. […] have (until today) was her own outdoor, window-accessible enclosure. The other cats all share a rather elaborate one, so it hardly seemed fair (by cat standards) that she was denied such […]

  2. stacey says:

    hi, I really love your plans (and cats)! I am wondering if you know approximately what you spent for the enclosure?

    1. Dan says:

      Hi, Stacey.

      I really don’t remember exactly. I had the wood for the base lying around already, so my costs were for the PVC, the wire, and the carpeting (which I may have had, too… can’t remember). Overall, I’m pretty sure it was well under $100.

      Thanks for reading and commenting!

  3. Sue says:

    Thanks for posting this! I’m inspired to do the same. You said that you would not work with the 1X1 fencing wire again. What would you recommend for someone who has never worked with wire before? Would metal window screen work?
    Thanks!

    1. Dan says:

      Sue, I was just being sarcastic. The wire, no matter what kind, is a pain to work with because there are always sharp little stabby edges no matter what you do. Ha!

      Just make sure you have a quality pair of wire cutters (no Dollar Store kind) because otherwise cutting all the pieces is all but impossible. 🙂

      The 1×1 wire is perfect for the cat enclosure, though. 1×2 would be fine as well, but I’ve never seen it in the lighter gauge like I used for this project.

      Good luck!

  4. Sue says:

    Thanks Dan for answering me! I decided to use black wire storage boxes and tie them together. It was quicker for me:) However your design using the PVC was very clever since you can’t get the y-shaped corners at Home Depot. i looked for them. You can check out this website to see an idea of what I built.

    http://www.catandcaboodle.com/Build-A-Do-It-Yourself-Outdoor-Cat-Enclosure-Or-Run_ep_41-1.html

    I would send a picture of my final project, but I don’t know how:) Kitty likes it though!

    Have a great day!

    1. Dan says:

      Sue, that’s fantastic! What a great idea for making the walls! I imagine that would have saved a lot of wear and tear on my scraped-up fingers. Ha!

      I’m glad your cat enjoys it!

  5. Judy Reid says:

    I just saw this and it would make many kitties happy. I just lost one she would of loved this. But I have 4 more that I know will enjoy. Just think if everyone built one for there cat how many cats would learn to stay inside and love life.

    1. Dan says:

      I agree, Judy! The cats love being out in the enclosure and I know they’re safe from all kinds of things. I have an even bigger one planned for our new house! 🙂

  6. marci says:

    this is great. light weight and weather proof. i wish you had posted he measurments so i wouldn’t have to do the blasted math also!!!!

    1. Dan says:

      If you look really closely at the 2nd picture, the measurements are in there, BUT… I wouldn’t put much stock in them. I was kind of winging it! 🙂

      Good luck! I hope yours turns out great!

  7. Kim says:

    Dan,

    I am super impressed with this. I was wondering if it would be possible for you to make me one, and of course I would pay you for it. Please let me know. Your talent should not go to waste :). Plus, my future kitty would really, really, appreciate a nice outdoor space on my roof that connects to the outside of my bedroom.

    Please let me know if this is something you would consider doing. I would of course pay for the materials, your labor, and the shipping.

    Thanks,

    Kim Casamento

    1. Dan says:

      Kim,

      Thanks so much for the compliment! Sadly, I’m not able to make one of these for you right now. We’re doing a huge home remodel and I don’t have the time and space to work on something right now. However, it could be possible in the future (ie… 6 months or so). If you’re still interested then, feel free to drop me a note at dan-at-digitalchum-dot-com.

      Cheers!

  8. candice says:

    dan, i just wanted to say i found your article via pinterest & i was just going to skim over the photos to be honest but found your writing style so funny i read the whole article and a few more 🙂
    great work there young man! happy new year from melbourne, australia 🙂

    1. Dan says:

      Thanks, Candice! Happy New Year to you as well!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.